From superhydrophobic‐ to superhydrophilic‐patterned poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) architectures as a novel platform for biotechnological applications

The manufacture of three‐dimensional patterned electroactive poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) microstructures with tailored architecture, morphology, and wettability is presented. The patterned microstructures are fabricated using a simple, effective, low cost, and reproducible technique based on microfluidic technology. These novel structures can represent innovative platforms for advanced strategies in a wide range of biotechnological applications, including tissue engineering, drug delivery, microfluidic, and sensors and actuators devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1802–1810     

Synthesis and liquid crystalline behavior of bulky poly(methacrylamide)s

N‐(Bis(4‐(2‐ethylhexyloxy)phenyl)(phenyl)‐methyl)methacrylamide was synthesized and polymerized via reversible addition‐fragmentation chain‐transfer (RAFT) polymerization. The chain‐transfer agent (4‐cyano‐4‐(phenylcarbonothioylthio) pentanoic acid (CPADB)), combined with a chiral additive, and a radical initiator yielded polymers with dispersities between 1.2 and 1.4. At low concentrations, the polymers are soluble in hexanes and chloroform while at higher concentrations they swell in these solvents. Characterization of the polymers by wide‐angle X‐ray scattering (WAXS) revealed an interplanar distance of 19.0 Å. The WAXS data combined with polarized optical microscopy support a lamellar crystallization and lyotropic liquid crystalline behavior in hexanes and chloroform. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2563–2568     

Interactive Thermal Effects on Metal–Organic Framework Polymer Composite Membranes

Polymeric membranes are important tools for intensifying separation processes in chemical industries, concerning strategic tasks such as CO₂ sequestration, H₂ production, and water supply and disposal. Mixed‐matrix and supported membranes have been widely developed; recently many of them have been based on metal–organic frameworks (MOFs). However, most of the impacts MOFs have within the polymer matrix have yet to be determined. The effects related to thermal behavior arising from the combination of MOF ZIF‐8 and polysulfone have now been quantified. The catalyzed oxidation of the polymer is strongly affected by the MOF crystal size and distribution inside the membrane. A 16 wt % 140 nm‐sized ZIF‐8 loading causes a 40 % decrease in the observed activation energy of the polysulfone oxidation that takes place at a temperature (545 °C) 80 °C lower than in the raw polymer (625 °C).     

Physical mechanisms responsible for the water-induced degradation of PC61BM P3HT photovoltaic thin films

We show that [6,6]-phenyl-C61-butyric acid methyl ester (PC₆₁BM) at the surface of thin film blends of poly(3-hexylthiophene) (P3HT):PC₆₁BM can be patterned by water. Using a series of heating and cooling steps, water droplets condense onto the blend film surface. This is possible due to the liquid-like, water swollen layer of poly(3,4-ethylenedioxythiophene) polystyrene sulfonate. Breath pattern water deformation and subsequent drying on the film surface results in isolated PC₆₁BM structures, showing that migration of PC₆₁BM takes place. This was confirmed by selective wavelength illumination to spatially map the photoluminescence from the P3HT and PC₆₁BM. Within a device, redistribution of the surface PC₆₁BM into aggregates would be catastrophic, as it would markedly alter device performance. We also postulate that repeated volume change of the poly(3,4-ethylenedioxythiophene) polystyrene sulfonate layer by water swelling may be, in part, responsible for the delamination failure mechanism in thin film solar cells devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 141–146     

Porous shape memory polymers: Design and applications

Porous shape memory polymers (SMPs) exhibit geometric and volumetric shape change when actuated by an external stimulus and can be fabricated as foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. These materials have applications in multiple industries such as textiles, biomedical devices, tissue engineering, and aerospace. This review article examines recent developments in porous SMPs, with a focus on fabrication methods, methods of characterization, modes of actuation, and applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1300–1318     

Comparative analysis of shape memory-based self-healing coatings

Self-healing materials exhibit the ability to repair and to recover their functionality upon damage. Here, we report on an investigation into preparation and characterization of shape memory assisted self-healing coatings. We built on past work in which poly(ε-caprolactone) electrospun fibers were infiltrated with a shape memory epoxy matrix and delve into fabricating and characterizing a coating with the same materials, but employing a blending approach, polymerization induced phase separation. After applying controlled damage, the ability of both coatings to self-heal upon heating was investigated. In both methods, coatings showed excellent thermally induced crack closure and protection against corrosion, with the blend approach being more suitable for large-scale applications given its process simplicity. Two different approaches to the preparation of shape memory-based self-healing coatings were compared for their ability to heal structurally and functionally by heating. These two approaches, electrospinning versus polymerization-induced phase separation were found to feature comparable and quite complete healing, with the latter system offering the advantage of facile processing. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1415–1426     

Shear-induced nonisothermal crystallization of two grades of PLA

Shear-induced nonisothermal crystallization of two commercial polylactides (PLAs) differing in optical purity was studied. The molten polymers were sheared at selected temperatures (T_s) and subsequently cooled. The crystallization was followed by a light depolarization method, whereas the specimens were analysed ex-situ by DSC, 2D-WAXS and SEM after etching. It was found that the effect of shear, especially on the crystallinity developed during post-shearing cooling, intensified with a decrease of T_s from 160 to 146 ^°C, and with increasing shear rate and strain. Moreover, the effect of shear on PLA1.5 with d-lactide content of 1.5% was stronger than PLA2.8 with 2.8% of d-lactide, although maximum crystallinity of both polymers was practically the same. A decrease of cooling rate from 30 to 10 ^°C/min increased crystallinity of both PLAs, except for those shearing conditions which induced high crystallinity even during faster cooling. Although SEM examination revealed some row-nucleated forms, no significant crystal orientation was detected by 2D-WAXS, indicating that, under the experimental conditions, the shear induced predominantly point-like nuclei.     

Temperature and pH dual‐sensitive polyaspartamide derivatives for antitumor drug delivery

The pH‐sensitive tertiary amino groups were introduced to synthesize temperature and pH dual‐sensitive degradable polyaspartamide derivatives (phe/DEAE‐g‐PHPA) containing pendant aromatic structures and ionizable tertiary amino groups. The thermo/pH‐responsive behavior of phe/DEAE‐g‐PHPA polymer can be tuned by adjusting the graft copolymer composition. Due to the pH sensitivity of the phe/DEAE‐g‐PHPA‐g‐mPEG polymer with hydrophilic long PEG chain, the micelles and the anticancer drug‐loaded micelles were prepared by a quick pH‐changing method without using toxic organic solvent. The obtained polymeric micelles, paclitaxel‐loaded micelles and doxorubicin‐loaded micelles were stable under physiological conditions. Both the drug‐loaded micelles showed much faster release at pH 5 than at pH 7.4. The doxorubicin‐loaded micelles showed obvious and better anticancer activity against both HepG2 and HeLa cells than free doxorubicin. Thus these nontoxic, dual thermo‐ and pH‐sensitive phe/DEAE‐g‐PHPA‐g‐mPEG micelles may be a promising anticancer drug delivery system. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 879–888     

In Situ Photocatalytically Heterostructured ZnOAg Nanoparticle Composites as Effective Cathode‐Modifying Layers for Air‐Processed Polymer Solar Cells

A heterostructured semiconductor–metal ZnO?Ag nanoparticle (NP) composite was constructed through a straightforward photocatalytic strategy by using UV irradiation of ZnO NPs and an aqueous solution of Ag precursor. The ZnO?Ag NP composites serve as an effective cathode‐modifying layer in polymer solar cells (PSCs) with increased short‐circuit current density owing to the light‐trapping effect, and improved optical and electrical conductivity properties compared with pure ZnO NPs. The Ag NPs, which are photodeposited in situ on ZnO NPs, can act as effective antennas for incident light to maximize light harvesting and minimize radiative decay or nonradiative losses, consequently resulting in the enhanced photogeneration of excitons in PSCs. Systematic photoelectron and ‐physical investigations confirm that heterostructured ZnO?Ag NPs can significantly improve charge separation, transport, and collection, as well as lower charge recombination at the cathode interface, leading to a 14.0 % improvement in air‐processed device power conversion efficiency. In addition, this processable, cost‐effective, and scalable approach is compatible with roll‐to‐roll manufacturing of large‐scale PSCs.     

Amphiphilic thermoset elastomers from metal‐free,click crosslinking of PEG‐grafted silicone surfactants

The hydrophobicity of silicone elastomers can compromise their utility in some biomaterials applications. Few effective processes exist to introduce hydrophilic groups onto a polysiloxane backbone and subsequently crosslink the material into elastomers. This problem can be overcome through the utilization of metal‐free click reactions between azidoalkylsilicones and alkynyl‐modified silicones and/or PEGs to both functionalize and crosslink silicone elastomers. Alkynyl‐functional PEG was clicked onto a fraction of the available azido groups of a functional polysiloxane, yielding azido reactive PDMS‐g‐PEG rake surfactants. The reactive polymers were then used to crosslink alkynyl‐terminated PDMS of different molecular weights. Using simple starting materials, this generic yet versatile method permits the preparation and characterization of a library of amphiphilic thermoset elastomers that vary in their composition, crosslink density, elasticity, hydrogel formation, and wettability. An appropriate balance of PEG length and crosslink density leads to a permanently highly wettable silicone elastomer that demonstrated very low levels of protein adsorption. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1082–1093